Español | English

« return

variants

117-FH/TAR/PD/BH/MGTO
Sleeve of 10,14,18 or 20 cms with SYMPATEX membrane

117-FH/TAR/P/MGTO
Sleeve of 10,14,18 or 20 cms

117-FH/TAR/PD/PE
With elastic cuff adjusted at the wrist

117-FH/TAR/PD/BH/PE
With elastic cuff adjusted at wrist With SYMPATEX membrane

117-FH/TAR/P/PE
With elastic cuff adjusted at the wrist

description materials

5 finger glove with sleeve, that might have a length of 10, 14, 18 and 20 cm. Grain leather of approximately 0,7 to 1,3 mm, with water-resistant treatments. Colour: beige, but if requested it may be green, black, yellow or chrome. High cutting resistance textile lining in palm and back. Protector of knuckles made of grain leather or if requested it may be supplied by orange fluorine fabric. Elastic tape with adjusted in back. The seams are made of high resistant thread. If requested the gloves may be supplied with: a short-cardine to keep them attached; If request it may be supplied with Velcro stripe adjusted at the cuff; Interior elastic cuff; Antivibratory sponge in palm and back.
Sizes 8, 9, 10, 11 and 12.

levels protection

Levels of protection:

Mechanical as EN 388/2003:
ABRASION: Level 4 (>8.000 Cycles).

CUT:

Level 2 (índice 3,22).

TEAR:

Level 4 (80,3 Newton's).

PERFORATION: :

Level 3 (114,8 Newton's).
Thermal as EN 407/2004:
FLAMMABILITY: Post-combustion <2 sec. = Level 4
CONTACT HEAT (palm): 43 s. (100ºC) =
Level 1
CONVECTIVE HEAT (back): HTI24 25 s. =
Level 4.
RADIANT HEAT (back): RHTI24 81 s.
Level 3.
MELTDOW METAL SPATTERINGS: >35 drops.
Level 4.
F-PROYECCIONES DE METAL FUNDIDO: >60 grams = Level 2.

care

If clean up is needed it is recommended to brush it or use industrial dry-clean cleaning procedures.

instructions for use

This glove is specially designed for tasks, where a good mechanical and thermal protection is required, maintaining a good comfort level such as forest firemen tasks, fumances, foundries, glasswork, etc.
DO NOT USE THIS GLOVE
In front of risks which may exceed levels specified by the norms EN 388/2003 and EN 407/2004, or when the risks were not mechanical or thermal (like for example chemical, electrical, etc.).

  Gant de 5 doights, avec manchette. Longueurs: 10, 14, 18 ou 20cm. Cuir fleur hydrofuge et siliconé. Épaisseur: 0,7/1,3 mm. Couleur beige (sur demande, possibilité de vert, noir, jaune ou chrome). Doublure textile dans la paume et le dos, de haute résistance à la coupure. Renfort sur le dos en cuir fleur ou suivant demande, en tissu orange fluor. Élastique d'ajustament dans le dos. Les coutures sont réalisées avec du fil de haute résistance. Suivant demande le gant peut également incorporer anneau et mousqueton, serrage velcro d'ajustament dans la manchette, poignet élastique interne et/ou mousse antovibratoire dans la paume et le dos.
Tailles: 8, 9, 10, 11 et 12.

Polígono Mora Garay - C/ Isaac Peral, 25 y 27 - 33211 Gijón - Principado de Asturias - España - ver mapa

Tels. 985 323 123 / 985 325 316 - Fax 985 322 429 - E-mail: info@guantesmoran.com